Yukon SIGHTLINE N450S Manual Del Usuario página 18

Freeze
Function FREEZE is designed to zero your riflescope.
The highlight of the function is that, unlike in the "one shot zeroing" method,
you do not need to hold the riflescope in the aiming point.
•
Having selected a zeroing distance and having entered the menu option,
enter the submenu FREEZE with a short press of the M button or press briefly
the ON button when in the zeroing mode.
•
Press briefly the controller - a screen shot (image freezing) will be made –
icon will appear on the display.
•
For detailed description of the zeroing procedure, please refer to section 12
"Zeroing"
Edit distance title
This submenu allows you to change the value of the current distance.
•
Having selected a zeroing distance and having entered the submenu, enter
the submenu "Edit distance title" with a short press of the controller.
•
Select values for each digit by rotating the controller. Toggle between the
digits with a short press of the controller.
•
Confirm you selection with a long press of the controller.
Sensors
This option includes two menu options – "Auto shutdown" and "Side incline".
Function "Auto shutdown"
This option allows you to activate automatic shutdown, which recognizes
whether your riflescope is in a shooting position. Automatic shutdown is actu-
ated after you move the riflescope relative to the optical axis:
Upwards > 70°; Downwards >70°; Leftwards >30°; Rightwards >30°
•
Hold down the controller (3) to enter the main menu.
•
Rotate the controller to select option "Sensors", Press briefly the controller.
•
Rotate the controller to select option "Auto shutdown". Press briefly the
controller.
•
Rotate the controller to select the time period (1 min, 3 min, 5 min) upon
expiry of which the riflescope will automatically shut down. Select "Off" if
you wish to desactive Auto shutdown.
•
Confirm your selection with a brief press of the controller.
Note: if the function is activated, respective icons on the status bar show the
status of the function:
Function "Side incline"
This option allows you to activate/deactivate the side (horizontal) incline of
the weapon.
Side incline is indicated by "sector" arrows on the edges of the horizontal line
of the reticle. Arrows show the direction in which you should move your rifle to
eliminate side incline.
There are three modes of side incline:
5°-10° - one sector arrow;
10°-20° - two sector arrow;
>20° - three sector arrow.
A side incline of less than 5° is not shown on the display.
16
1 min.
Fig.
6