General Settings - Yukon SIGHTLINE N450S Manual Del Usuario

•
Hold down the controller (3) to enter the main menu.
•
Rotate the controller to select option "Sensors". Press briefly the controller.
•
Rotate the controller to select option "Side incline".
•
Select "On" by rotating the controller to activate side incline; "Off" to
deactivate.
•
Confirm your selection with a brief press of the controller.

General settings

Interface language selection
•
Hold down the controller (3) to enter the main menu.
•
Rotate the controller to select option "General settings".
•
Press briefly the controller to enter the menu item.
•
Rotate the controller to select option "Language".
•
Select one of the available interface languages by rotating the controller:
English, French, German, Spanish, Russian.
•
Switch between languages by rotating the controller.
•
Save selection and exit the submenu with a long press of the controller.
Date setup
•
Hold down the controller (3) to enter the main menu.
•
Rotate the controller to select option "General settings".
•
Press briefly the controller (3) to enter the menu item.
•
Rotate the controller to select option "Date".
•
Press briefly the controller (3) to enter the menu item "Date".
•
Date format is displayed as: YYYY/MM/DD (example 2018/10/24).
•
Select the correct values for the year, month and date with a short press of
the controller.
•
Switch between digits with a short press of the controller.
•
Save selected date and exit the submenu with a long press of the controller.
Time setup
•
Hold down the controller (3) to enter the main menu.
•
Rotate the controller to select option "General settings".
•
Press briefly the controller (3) to enter the menu item.
•
Rotate the controller to select option "Time". Press briefly the controller.
•
Select the desired time format - 24 or PM/AM - with a short press of the
controller:
•
Switch to hour setup with a short press of controller.
•
Select hour value by rotating the controller.
•
Switch to minute setup with a short press of controller.
•
Select minute value by rotating the controller.
•
Save selected date and exit the submenu with a long press of the M button.
Selection of units of measurement
•
Hold down the controller (3) to enter the main menu.
•
Rotate the controller to select option "General settings".
•
Rotate the controller to select option "Units of measurement". Press briefly
the controller.
17