Guidelines For Operation; Charging The Rechargeable Battery - Yukon SIGHTLINE N450S Manual Del Usuario

Guidelines for Operation

7
The riflescope has been designed for long-term use. To ensure long perfor-
mance, please adhere to the following:
•
Before use make sure that you have installed and fixed the mount according
to the instructions of the section "Installation of mount".
•
Store with the lens cover on in the carrying case.
•
Turn the scope off after use.
•
The riflescope is not designed for submersion.
•
Attempts to disassemble or repair the scope will void the warranty!
•
The riflescope can be used in various operating temperatures. However, if it
has been brought indoors from cold temperatures, do not turn it on for 3 to 4
hours. This will prevent external optical surfaces from fogging.
•
If the scope is unable to mount onto the rifle securely, or you have doubts
about the mounting system, see a qualified gunsmith. Using the weapon with
a poorly mounted scope can lead to inaccurate target shooting!
•
To ensure reliable performance, it is recommended to carry out regular
technical inspections of the unit.
•
To ensure optimal image in the daytime, the lens cover with integrated filter
must be closed.
Rechargeable Battery
8
Warning! To ensure longer operating time for your riflescope, we suggest using
the supplied rechargeable DNV Battery Pack (BP)(included).

Charging the rechargeable battery

•
Install into the charging container (A) the BP (B) observing polarity. Battery
Pack's contacts (C) must match the container's contacts (D).
•
Make sure that the BP's lever is the "OPEN" position.
•
Press the Battery Pack cover and turn the Battery Pack lever (E) 90 degrees
clockwise.
•
Plug the mains charger (F) into a socket 100-240V. The indicator on the
charger will glow red. After full charge the indicator will change its color to
green. Remove the charger from the socket.
•
Install the BP all the way in as shown, turn the BP's lever.
•
The device is ready for operation.
Recommendations for battery charging
•
Only use the charger supplied with the Battery Pack. The use of another
charger may irreparably damage the Battery Pack or the charger and may
cause fire.
•
Never use a modified or damaged charger.
•
Charging current and voltage must comply with the parameters outlined in
the specifications table.
•
Charge the Battery Pack at a temperature ranging from 0 °C to +45 °C.
•
Do not leave the Battery Pack with a charger connected to the mains longer
than 24 hours after full charge.
•
Do not leave the battery unattended when charging!
6