Sauder Carson Forge Serie Manual Del Usuario página 4

1 1
Do not insert
CAM DOWELS
into this edge.
Arrow
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
Assemble your unit on a carpeted fl oor or on the empty carton to avoid scratching your unit or the fl oor.
Push sixteen HIDDEN CAMS (1F) into the ENDS (A and B), PANEL (D), and CENTER SLAT SUPPORT (J). Then, insert the
metal end of six CAM DOWELS (2F) into each HIDDEN CAM on the long edges of the PANEL (D) and the short edges of
the ENDS (A and B).
Page 4
Do not tighten the HIDDEN CAMS in this step.
2F
D
www.sauder.com/services
Look for this icon. It means a video
assembly tip is available at:
www.sauder.com/services/tips
Arrow
(16 used)
1F
(6 used)
Do not insert CAM
DOWELS into this part.
J
Do not insert CAM
DOWELS into this edge.
Do not insert CAM
DOWELS into the
long edges.
A
B
Arrow
1F
415137