Cleaning And Maintenance - Remington REM-210CF-120 Manual De Usuario E Instrucciones De Funcionamiento

NEVER LEAVE HEATER UNATTENDED WHILE CONNECTED TO
Operation
1. Position the heater so that it stands upright
on a firm, level surface and at a safe distance
from wet environments and flammable
objects.
2. Connect the heater to the proper electrical
power.
3. Turn the heat dial from OFF to LOW or HIGH
4. Unit will oscillate when heat dial is set to
or . If unit is set to LOW or HIGH, the
heater will not oscillate.
5. Adjust the amount of oscillation by setting the
oscillation adjustment dial to
120° or 270°. Heater must be
set to
Setting
OFF
Unit is Off
Heat element on, no oscillation
Heat elements on, no oscillation
Heat element on, oscillation
Heat elements on, oscillation

Cleaning and Maintenance

– Before cleaning the appliance, disconnect it
from the outlet and let it cool down.
– The enclosure is easy to get dirty. Wipe it
often with a soft sponge. For very dirty parts,
wipe with a sponge dipped in < 122°F water
and mild detergent, then dry the heater
enclosure with a clean cloth. Be careful not to
let the water enter the inside of the appliance
© 2018, Pinnacle Climate Technologies,Inc
A POWER SOURCE
or for oscillation.
Function
Maintenance
Operation
Automatic Overheat Safety Control
– This heater is equipped with overheat
protection circuit. When a potential overheat
temperature is reached, the system will
automatically shut the heater
– In order to protect the enclosure, do not
splash water onto the heater, and never
use a solvent like gasoline, isoamyl acetate,
toluene, etc. to clean the heater.
3 Carbon Fiber Quartz Radiant Heater