Chicco Penguin Activity Walker Manual De Instrucciones página 8

Instruction Manual
GB USA
Age: From 9 months +
• Please read these instructions carefully before use and keep for future reference.
• Runs on 2 x 1.5 volt "AA" batteries (not included).
WARNINGS
For your child's safety: WARNING!
• Before using the product, remove and dispose of any plastic bags and any other packaging elements and keep them
out of reach of children. Suffocation hazard.
• Check the product regularly for signs of wear and damage, making sure it is intact and assembled correctly. Should any
part be damaged, do not use the toy and keep it out of reach of children.
• This toy must only be used under adult supervision.
• Only allow baby to use this toy on flat, stable surfaces with no obstacles (such as carpets, mats uneven flooring).
• Never allow this toy to be used on roads, paths or on uneven ground; make sure it is used in areas with no obstacles
and away from all potential hazards (such as swimming pools, canals, ponds, steps and staircases etc.).
ASSEMBLY INSTRUCTIONS
• Warning: This product must be assembled by adults only.
• The toy only needs assembling the first time it is used. To guarantee that the toy remains firmly intact, once
the components have been assembled, they must never be removed from the central unit. It is therefore
most important that the assembly instructions are followed carefully.
Stabilisers
Insert the right stabiliser R (Diag. A-1) into its seat on the panel R (Diag. A-2), you will hear a click when it slides properly
into place. Complete this operation by inserting the left stabiliser L (Diag. B-3) into its seat on the panel L (Diag. B-4),
you will hear a click when it slides properly into place.
Handle
Insert the ends of the handle (Diag. C-5) into their seats on the upper section of the panel (Diag. C-6), you will hear a
click when they are fitted properly in place.
On completing the assembly, check that the components are all firmly attached to the panel before allowing baby to
play with it.
HOW TO USE THE TOY
• To enable the electronic functions, simply move the switch (Diag. D-7) from the O (OFF) position to the I<)) / II<)))
position, according to the volume desired.
• In order to avoid using up the batteries for no reason, it is recommended to switch off the toy by moving the switch
(Diag. D-7) to O (OFF) when not in use.
First Steps Function
The first steps function is ideal for developing balance and motor skills as it provides a stable and secure support for
baby as he starts to stand up and take his very first steps.
To make things even more enjoyable, every step is accompanied by a lively tune. Baby soon understands that every step
he takes triggers the music which encourages him to keep going.
First Steps details:
• Handle (Diag. D-8): when baby stands in between the two stabilisers, he will find it very easy to grasp and keep hold
of the handle;
• Wheel lock (Diag. D-9): stops the rotation of the rear wheels;
• Automatic music playing system (Diag. D-10): as the toy is pushed forwards, an entertaining tune is played; if baby
stops, the music also stops and this encourages him to carry on walking.
Activity Centre Function:
This First Steps toy also has an activity centre with lights, sounds and lots of play activities; these entertain and amuse
baby whilst stimulating his movements, visual and hearing skills and also logical association ability.
Activity Centre details:
• Slots for the play blocks (Diag. E-11): baby slots in the blocks which fall through a special channel into the basket at
the bottom. When the blocks are moving, they trigger a lively sound and light effect.
Penguin Activity Walker
8