ENGLISH
LAMINATOR CONTROLS
A
On / off switch
B
Standby / Power on button
C
Auto (hot) / cold button
D
Reverse button
CAPABILITIES
Performance
Entry width
Pouch thickness (min.)
Pouch thickness (max.)
Estimated heat-up time
Cool down time
Lamination speed
Number of rollers
Ready indication
Manual reverse function
Clear Path / Anti-jam engine
LED interface
Sleep Mode
Photo-capable
Carrier-free
Exit tray
IMPORTANT SAFETY INSTRUCTIONS - KEEP FOR FUTURE USE
- The machine is for indoor use only. Plug the machine into an easily accessible outlet.
- To prevent electrical shock - do not use the appliance close to water, do not spill water on to the appliance, power cord or wall socket.
DO always insert sealed edge of pouch first into laminator.
DO ensure the machine is on a stable surface.
DO test laminate scrap sheets and set the machine before final
laminations.
DO remove staples and other metal articles prior to laminating.
DO keep the machine away from heat and water sources.
DO turn off the machine after each use.
DO unplug the machine when not in use for an extended period.
DO use pouches designed for use at the appropriate settings.
DO keep away from pets, while in use.
4
E
12.5"
3 mil (per side)
7 mil (per side)
1 minute
30-60 minutes
up to 24"/min
4
Light & beep
Yes
Yes
Yes
Yes (30 mins)
Yes
Yes
Yes
E
Carry handles
F
Pouch / document entry slot
G
Pouch / document exit
H
Exit tray
Technical Data
Voltage
Frequency
Wattage
Amps
Dimensions (HxWxD)
Net weight
Max document thickness
DO NOT leave the power cord in contact with hot surfaces.
DO NOT leave power cord hanging from cupboards or shelves.
DO NOT use appliance if the power cord is damaged.
DO NOT attempt to open or otherwise repair the machine.
DO NOT exceed the machines quoted performance.
DO NOT allow minors to use this machine.
DO NOT laminate sharp or metal objects (eg: staples, paper
clips).
DO NOT laminate heat-sensitive documents (eg: tickets,
ultrasounds etc) on hot settings.
DO NOT laminate an empty pouch.
120V AC
60Hz
1200 Watts
10 Amps
4.5"x20"x6.75"
10.1lb
.03"/0.7mm