Need Help; Storage & Cleaning - Fellowes Neptune 3 125 Manual Del Usaurio

TROUBLESHOOTING
Problem
No glowing 'blue' Power on LED
Pouch does not completely seal
the item
Pouch is lost in the machine
The reverse button LED is blinking
and a beep is sounding
Pouch is damaged after lamination Damaged rollers or adhesive on rollers

NEED HELP?

Let our experts help you with a solution.
www.fellowes.com
Customer Service...
Always call Fellowes before contacting your place of purchase, see the rear cover for contact details.
Consider registering your machine at www.fellowes.com/register to receive updates and additional information.
STORAGE & CLEANING
Switch the power off located at the rear side of machine. Unplug the machine at the wall. Allow the machine to cool. The outside of
the machine can be cleaned with a damp cloth. Do not use solvents or flammable materials to polish the machine. Cleaning sheets can
be purchased for use with the machine. When the machine is warm – run the sheets through the machine to clean any residue off the
rollers. For optimum performance, it is recommended that cleaning sheets are used with the machine regularly. (Cleaning sheet order
code #5320603).
6
Possible cause
Machine not switched on
Item may be too thick to laminate
Pouch is jammed
Pouch was inserted open end first
Pouch was not centered on entry
Pouch was not straight upon entry
Empty pouch was used
Damaged rollers or adhesive on rollers
Pouch is mis-fed or jammed
Solution
Switch on machine at right side and at wall
socket. Press power standby button
Maximum document thickness equals .025". Pass
through laminator a second time
Select the reverse button and pull out the pouch
by hand
Press and hold the reverse button on the front of
the machine to remove the laminate
Pass cleaning sheets through the machine to test
and clean rollers