Resolution Setting - Celestron COSMOS 44362 Manual De Instrucciones

CONNECT TO TV
• Insert the 1/8-inch plug on the end of the supplied video
cable into the Cosmos Microscope's AV OUT port located
on the back of the base.
• Insert the yellow RCA plug on the video cable into one
of your television's yellow video input connectors.
NOTE:
Refer to your television's manual to locate your TV's video connector.
• Turn on the television. (Be sure your television is tuned
to the appropriate input channel.)
• You should now see an image of the specimen you are
viewing on your television screen.
6. SOFTWARE MENU INTRODUCTIONS
MAIN MENU
Press SETTINGS button to enter Main Menu 1.
•
The menu choices will vary depending on whether you
•
are in still image or video mode.
When in still image mode, you will see:
•
1. Resolution
2. Time Lapse
3. Quality
4. Sharpness
There is only one setting in video mode:
•
1. Resolution

RESOLUTION SETTING:

In still image mode, choices are:
•
- 12.0 MP (interpolated*)
- 9.0 MP (interpolated*)
- 5.0 MP
- 3.0 MP
- 1.3 MP
- VGA
Video-in on TV monitor
Video-out
11
ENGLISH