Elkay EFC22-A Instalación Y Manual De Usuario página 4

1. Turn off cold water shut-off valve then turn on the kitchen faucet to cold and allow all water
to drain from line.
2. Disconnect the cold water line from the cold water shut-off valve.
NOTE: If rigid plumbing pipe (metal or plastic) is used, you may need to shorten the pipe using a
hacksaw or pipe cutter to commodate the tee ball valve.
3. Install the tee ball valve onto the supply valve and the cold water line to the top of the tee
ball valve.
NOTE: Do not over tighten the connections. Damage and/or leaks can occur if the connections
are over tightened.
1. Cold Water
1000003973 (Rev. A - 05/17)
Installation
Shut-Off
Valve
2. Cold Water
Line
Page 4
3. Tee Ball
Valve