Elkay EFC22-A Instalación Y Manual De Usuario página 6

8. Use the ¼" tubing to connect the tee ball valve to the fi lter manifold inlet (IN). Use the utility
knife to cut the tube to length and check for full engagement on quick connect fi ttings.
NOTE: A straight cut provides the best seal and prevents leaks.
NOTE: Wetting the end of the tube lowers the insertion force.
9. Use the ¼" tubing to connect the dispensing faucet to manifold outlet (OUT).
10. Open the dispensing faucet then turn on the cold shut-off valve and open the tee ball valve.
Inspect for leaks at the fi lter system and all fi ttings.
11. Flush the system by allowing the water to run to drain for 10 minutes. It is normal for the water
will be cloudy with carbon and air during the fl ush time. After fl ushing the system is ready to
use.
1000003973 (Rev. A - 05/17)
IN
PP MS
Page 6
OUT
EFU23-A Shown
UF