Blumfeldt Ocean Planet 10033275 Manual Del Usuario página 10

EN
10
NOTES ABOUT THE PRODUCT
• The solar pump is designed for fountain, pond or outdoor use. In order for
the solar pump to operate, the solar panel needs to be in direct sunlight.
• This solar pump is equipped with battery pack and can be switched on
and off by a touch switch on the control housing. In evening, four built-in
white LEDs will give light automatically to enhance the beauty scene of the
water jet.
ASSEMBLY
1 Unpack all components carefully;
2 Connect the hose from the top jug to the vent of the pump and place the
pump underwater and make sure that, it is fully immersed in water;
3 Connect the pump cable to the socket of the control housing on the rear
side of the solar panel;
4 Connect the LED light cable to the socket of the control housing;
5 Make sure direct sunlight shines on the solar module when selecting the
right place for the solar module. By this way the built-in battery will be
charged.
6 The solar fountain is now ready to use.
LED-Light
LED
Pump