Maintenance; Replace The Light Bulb - Vollrath BMA7103 Manual Del Operador

MAINTENANCE

Replace the light bulb

NOTICE: Wear clean gloves or handle the new bulb with a clean
cotton cloth. Do not touch the halogen bulb with bare
hands. This can damage the bulb and cause premature
failure.
NOTICE: If the halogen bulb does come in contact with your skin,
gently clean the bulb surface with an alcohol-based liquid.
6
1. Turn off and unplug the equipment.
2. Allow the light bulb to cool completely.
3. The light bulb is held in place under spring tension. To remove the
light bulb, push the light bulb towards one end; this will release the
other end. Lift the lamp out of the holder.
4. Remove and discard the old light bulb.
5. To install the new light bulb, push the light bulb towards one end and
align the other end into the bulb holder. Slowly release the light bulb.
Bain Marie Heated Display Case Operator's Manual