Operating Instructions; Deep Frying; After Cooking - Magic Chef MCL3LDFRT Manual Del Usuario

Freidora de inmersión
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATING INSTRUCTIONS

DEEP FRYING

1.
ALWAYS make sure the deep fryer is turned off when starting.
2.
Pour the oil into the bowl so that the fill level falls between the "Min" and Max" marks.
NOTE: It is recommended to use liquid oil. Lard or solid fats can be used, but must be melted prior
to using by placing small pieces of it into the bowl and warming it on the lowest setting. Once it is fully
melted, you can set the control to the required cooking temperature.
3.
Place the lid on the bowl.
4.
Attach the magnetic cord and plug the fryer in; the red power indicator will light.
5.
Set the desired temperature by turning the temperature control knob. The green heat indicator will light
and remain lit while the fryer is heating up. Once the unit reaches the set temperature, the green heat
indicator light will turn off.
NOTE: The heat indicator will turn on and off while the fryer is in use, as needed to maintain the
selected temperature.
6.
DO NOT add food until the required temperature is reached.
7.
Remove the lid and carefully lower the basket with the food into the bowl. Make sure the oil level does not
rise to the top of the bowl.
NOTE: ALWAYS hold the basket handle firmly when fitting or removing the lid.
CAUTION: When putting food into or removing it from the fryer, hot oil may splatter. Take care when
removing the lid, as hot steam may be released.
There is a non-auto resetting thermostat built in the product. If the deep fryer has been in use for a prolonged
time, the built-in thermostat will activate and cut off the current to protect the appliance from overheating.
Reset the thermostat by pushing the indicated button on the back of the control panel, after the heating element
has cooled down, to enable the deep fryer to function normally again.

AFTER COOKING

1.
Carefully lift the basket out of the oil and use the clips to hang it on the front edge of the bowl.
CAUTION: Handle may be hot after extended use.
2.
Allow the oil to drip from the food before removing from the basket.
3.
Set the temperature control knob to the lowest setting and unplug from the outlet.
4.
Allow the fryer to cool for at least 1-2 hours before emptying the oil, moving, or cleaning.
CAUTION: DO NOT attempt to move the deep fryer while it is hot.
FOOD PREPARATION TIPS
ALWAYS make sure that the food is dry before lowering it into the hot oil.
Ensure that the food is roughly the same size so that it cooks evenly. Avoid very thick pieces.
Some types of food should be breaded before being cooked in the deep fat fryer.
Make sure you remove as much ice as possible from frozen food. However, it does not need to be defrosted
before cooking.
DO NOT fill the basket above the max mark on the metal plate under the handle.
9

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido