Sabrent NT-WRPT Manual Del Usuario página 3

How to configure the Wi-Fi Repeater
You can configure the Wi-Fi Repeater by connecting it with your computer/laptop with
enclosed RJ45 cable or wirelessly.
A. Configure the Wi-Fi Repeater wirelessly.
A1. Plug the Wi-Fi Repeater to a wall socket.
A2. Click on the network icon ( or
on the right bottom of your desktop. You will
find the signal from the Wi-Fi Repeater.
Click on 'Connect' and wait for a few
seconds.
A3. Open web browser and type
http://192.168.10.1 in the browser's
address box. This number is the default IP
address for this device.
Note: Please check whether the WiFi-Repeater accord with factory default settings
once you can't download http://192.168.10.1. If you are still not sure what reasons,
you can reset the WiFi-Repeater, just need to press the
then try again.
Wireless-N Wifi Repeater
)
reset button for 10 seconds,
English-03
A4. The login screen below will appear. Enter the "User Name" and "Password"
then click "OK" to login. The default User name is "admin" and Password is "admin".
A5. After logging in, you will see the web page below: Click on 'Repeater' to continue.
English-04 Wireless-N Wifi Repeater