Firmware Upgrade - Sabrent NT-WRPT Manual Del Usuario

Change Management password
Default password of Wireless Router is "admin", and it's displayed on the login
prompt when accessed from web browser. There's a security risk if you don't change
the default password, since everyone can see it. This is very important when you
have wireless function enabled.
To change password, please follow the following instructions:
Please click 'Management -> Password'menu on the web management interface,
the following message will be displayed on your web browser:
If you want to keep original password unchanged, click 'Cancel'.
Click 'Apply' button, The WiFi Repeater will log off.
Wireless-N Wifi Repeater

Firmware Upgrade

The system software used by this router is called as 'firmware', just like any
applications on your computer, when you replace the old application with a new one,
your computer will be equipped with new function. You can also use this firmware
upgrade function to add new functions to your router, even fix the bugs of this router.
Please click 'Management-> Upgrade Firmware' located at the web management
interface, and then the following message will be displayed on your web browser:
Click 'Browse...' or 'Choose File' button first; you'll be prompted to provide the
filename of firmware upgrade file. Please download the latest firmware file from our
website, and use it to upgrade your router.
After a firmware upgrade file is selected, click 'Upload'button, and the router will
start firmware upgrade procedure automatically.
The procedure may take several minutes, please be patient.
NOTE: Never interrupt the upgrade procedure by closing the web browser or
physically disconnect your computer from router. If the firmware you uploaded is
corrupt, the firmware upgrade will fail, and you may have to return this router to the
dealer of purchase to ask for help. (Warranty voids if you interrupted the upgrade
procedure).
English-13 English-14 Wireless-N Wifi Repeater