Sabrent NT-WRPT Manual Del Usuario página 7

Configuring via Web Browser
Wireless Base Configuration – AP Mode
In AP mode and click "Wireless -> Basic Settings" located at the web management
interface, the following message will be displayed on your web browser:
You could configure the minimum number of Wireless settings for communication,
such as Network Name (SSID) and Channel. The Access Point can be set simply
with only the minimum setting items.
Wireless Enable Wireless On/Off
the "SSID" of your wireless network.
SSID
Auto (recommend)
Channel
Setup the wireless security and encryption to prevent from
unauthorized access and monitoring.
Security type
Supports 64/128-bit WEP, WPA, WPA2,
WPA/WPA2 encryption methods.
Security key the "Password" of your wireless network.
Click 'Apply' button, The WiFi Repeater will restart.
Wireless-N Wifi Repeater
Wireless Base Configuration – Repeater Mode
In Repeater mode and click "Wireless-> Basic Settings" located at the web
management interface, the following message will be displayed on your web
browser:
Wireless Enable
Delete
Repeater ssid
Security type
Security key
Click 'Apply'button, The WiFi Repeater will restart.
English-11 English-12
Wireless On/Off
Remove the repeater connection profile
the "SSID" of your repeater wireless network.
Setup the repeater ssid security type.
the "Password" of your repeater wireless network.
Wireless-N Wifi Repeater