Sabrent NT-WRPT Manual Del Usuario página 6

Adding a Wireless computers to the WiFi-Repeater with WPS Button
1. Log on to the computer.
2. Press the WPS button of the WiFi Repeater directly for 2 - 3 seconds.
3. Press the WPS button of the Wireless Adapter directly for 2 - 3 seconds. Click
Finish to complete the WPS configuration. (Please check your Wireless adapter
Manual with WPS configuration)
4. You should see icons for the computer you added and for the other
computers and devices that are part of the network.
Adding a wired (Ethernet) computer to the WiFi-Repeater
1. Plug the Wi-Fi Repeater to a wall socket. Connect your computer / laptop with the
Wi-Fi Repeater with enclosed RJ45 Cable.
2. To confirm that you added the computer, do the following:
Open Network by clicking the Start button
the search box, type network, and then, under Network and Sharing Center, click
View network computers and devices. You should see icons
computer you added and for the other computers and devices that are part of the
network.
For more information:
http://windows.microsoft.com/en-US/windows7/Add-a-device-or-computer-to-a-network
http://windows.microsoft.com/en-US/windows7/Setting-up-a-wireless-network
http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-wireless-network
Wireless-N Wifi Repeater
, and then clicking Control Panel. In
for the
English-09
How to configure your computer/laptop with the Network IP
Address
1. Log on to the computer.
2. Click the "Start" button (it should
be located at the lower-left corner of
your screen), then click "Control
Panel". Click "View Network Status
and Tasks", and then click "Manage
Network Connections". Right-click
"Local Area Network", then select
"Properties". When the "Local Area
Connection Properties" window
appears, select "Internet Protocol
Version 4 (TCP/IPv4)" and then click
"Properties".
3. Setting IP address manually: Type
IP address is 192.168.10.x (x is from 2
to 254), and Subnet mask is
255.255.255.0. Type the Router's LAN
IP address (the default IP is
192.168.10.1) into the Default gateway
field.
English-10 Wireless-N Wifi Repeater