Troubleshooting - Omcan MS-IT-0250-M Manual Del Usuario

WARNING: ALWAYS consult Omcan as regards to removal and disposal of the blade (Fig. 2, #16) so
that disposal can take place in complete safety.
DO NOT DUMP SCRAP COMPONENTS AS THEY REPRESENT A SERIOUS ENVIRONMENTAL
HAZARDS, PARTICULARLY FOR CHILDREN AND ANIMALS.
PROBLEM
Difficulty in slicing; excessive
resistance when the product is in
contact with the blade.
Slices are of irregular thickness.
Slices come out as "doorsteps".
Slices are empty in the middle.
Slices disintegrate into several
pieces; they are not sliced cleanly.
REFERENCE
Item Number Model Number
20013 MS-IT-0250-M
13634 MS-IT-0300-M
13639 MS-IT-0350-M
18830 MS-IT-0370-M
PROBABLE CAUSE
The blade is blunt.
The pusher fails to retain the
product correctly.
The blade is blunt.
The pusher fails to retain the
product correctly.
The blade is blunt.
The product is too soft (not mature
enough).
The blade is blunt.
Worn blade.
Description
Meat Slicer Manual Volano 10" / 250mm
Blade CE ETL Sanitation
Meat Slicer Manual Volano 12" / 300mm
Blade CE ETL Sanitation
Meat Slicer Manual Volano 14" / 350mm
Blade CE ETL Sanitation
Meat Slicer Manual Volano 15" / 370mm
Blade CE ETL Sanitation
15
Maintenance

Troubleshooting

SOLUTION
Sharpen the blade.
Reposition the pusher in order to
retain the product correctly.
Sharpen the blade.
Reposition the pusher in order to
retain the product correctly.
Sharpen the blade.
Press the pusher harder.
Sharpen the blade.
Replace the blade.
Manufacturer Model Number
250VO
300VO
350VO
370VO