Klarstein 10006588 Manual Del Usuario página 10

Free Standing
1. Attach the two plastic feet to the bottom of the appliance with the
delivered screws.
2. Be sure to place the convection heater on a flat surface.
Wall Mounting
Finding a suitable location:
In France the heater shall be installed and used accor-
ding NFC 15-100. The device must be installed so that
airflow is not obstructed. The installation must be done
by the service agent or similarly qualified persons in
order to avoid a hazard. Respect the minimal distances
between the device and the walls, the ground, the fur-
niture etc. (as requested in the picture):
• to the ceiling min. 60cm
• to the floor min. 30cm
• left, right and in front of the appliance min. 30cm
Installing and fixing the device:
1. Fix the wall brackets to the
wall with the provided screws
in packing.
Assembly
2. Hang the heat body to the
fixed wall bracket.
3. Fix the lock pieces with the
provided screw to the two top
holes on the top of wall bracket.
10