Hunter Victorian 81021 Guia De Instalacion página 15

C29
Go to step
E1
on page 18
to attach grille.
Existing Construction – accessible only from below
D11
D12
EXisTinG Fan
E
remove an existing fan and check to make sure the opening Move the housing into position above the ceiling.
is large enough to accommodate the new motor housing (8"x
8.5").
D13
D14
.
attach existing ducting to duct connector. Tape joints.
pull wires through strain relief
if ducting does not fit securely,
an adapter may need to be purchased.
15
43041-01 01/31/2008