Hunter Victorian 81021 Guia De Instalacion página 8

A21
Test the motor. if the motor does not run, check the plug
connection.
new Construction – suspended between joists
B11
E
slide the mounting rails into brackets.
B13
E
Mark position of screws by using holes as a template.
D
8
43041-01 01/31/2008
A22
Go to step
E1
on page 18
to attach grille.
B12
5/8
1/2
position the correct depth mark at the bottom edge of
the joist based on the thickness of your sheetrock.
B14
Drill a hole in the center of each outline.
5/8
1/2
1/8" Bit