General Weighing Operation - Taylor TE21P Manual De Instrucciones

Thank you for purchasing a Taylor® Digital Scale. Your scale is an example of
superior design and craftsmanship. In order to optimize its function, be sure the
read this instruction manual carefully before use. Keep these instructions handy
for future reference.
TO READY SCALE FOR USE
1. Remove the scale from its box along with its stainless steel platform cover.
2. Place the scale on a hard, flat surface. Uneven surfaces will affect accuracy. If
using the adapter, make sure the scale is not resting on the cord, otherwise it
may be unstable.
3. Install the plastic platform assembly onto the scale by matching the platform
posts with the mating holes on the top of the scale. Place the stainless steel
platform cover on top of the plastic platform assembly. Remove any protective
film from the platform cover.

GENERAL WEIGHING OPERATION

1. Place the scale on a hard, level surface.
2. Press the "ON/OFF" button to turn the scale on. The display first shows "88888",
followed by zero. If the display does not show zero, press the "ZERO/
button to reset (tare) the scale to zero.
3. The scale is set at the factory to weigh in pounds (lb). While the scale is on,
press the "UNIT" button to switch to ounces (oz), pounds/ounces (lb oz) or
gram (g) units of measurement.
4. Place the item to be weighed onto the platform. The display will count up to the
weight of the item. As you add weight, the weight displayed increases. The
weight is locked in when the " " icon appears. When all the weight is removed,
the display will return to zero.
5. If the scale is operating on battery power, it will automatically turn off after
approximately 2 minutes of nonuse (if the auto off function is engaged). Press
the "ON/OFF" button to turn the scale off manually. If the scale is operating on
adapter power, it will remain on until the "ON/OFF" button is manually pressed.
"