Listening To Records - GPO PR100 Manual Del Usuario

LISTENING TO RECORDS

1. Ensure the unit is placed on a flat surface.
2. Carefully open the turntable lid.
3. P ress On/Standby button on rear panel of turntable to operate.
The Bluetooth light flashes on bottom right corner of turntable.
4. Select PHONO / EQ THRU 'On' (14) on rear of unit.
5. P lace a record on turntable over the central spindle (Place the 45
RPM adapter over the central spindle when playing 45-RPM vinyl).
6. S et the Speed Selector to 33 or 45 RPM according to the record.
7. A uto-Stop, ON & OFF
• Set the button to "OFF" , there will be no movement.
• Set the button to "Auto-Stop", turntable will automatically stop when
the end of the record is reached for 33 rpm records.
• Set the button to "ON' , turntable will keep moving for both 33 rpm
& 45 rpm records
8. R elease the tone arm holder & remove the protective cap form the
stylus
9. L ift the tone arm from its rest with the tone arm lift lever (4).
10. G ently lower the tone arm to the beginning of the record, or to the
start of a particular track.
11. W hen the record is finished the tonearm will automatically stop. Lift
the tonearm form the record and put it back on the rest.
12. T o stop manually, lift the tonearm from the record and return it to
the rest.
TO FINISH
13. Turn the power off on the back panel.
14. Replace the protective cap on the stylus when not in use.
15. Slightly close the turntable cover.
15