POSITIONING EPD30/EPD30 PRO
POSITIONING
The models have been designed for indoor use however, they can be placed inside or outside the room to be dried.
Internal Positioning:
When positioning the unit inside the room, place it centrally, ensuring inlet and outlet ducts are clear of
obstruction. If required, ducts can be connected to the outlet and/or inlet (where fitted) to direct the drying
to specific areas. The 'Wet Air Out' MUST be ducted outside the room.
damp air in
dry filtered air out
wet air exhaust drain
+
8
|
• in the basement
Ø 5"
7.9 inch
• in the gym
Ø 1.5"