Ecor Pro EPD 30 Manual Del Usuario página 9

POSITIONING EPD50/EPD50 PRO
External Positioning (Models where Outlet Duct Fitted Only):
When positioning the unit outside the room, connect ducting to the outlet to direct the dry air-stream into the
room to be dried. Optionally, the inlet may also be ducted to the room to give a re-circulation effect. In this
case however, because the unit uses a portion for the inlet air for regeneration. Provision must be made in the
inlet duct to draw air also from outside the room.
damp air in
dry filtered air out
wet air exhaust drain
+
|
Ø 5" 11.8 inch
US
• for more
than one room
Ø 1.5" Ø 5"
9