Led Light - Truper DESI-36 Instructivo

Start Up
Installing the Bit
The tips can be inserted directly in
the magnetic bit support (D).
Insert the bit into
the magnetic bits' support
and press firmly until it stops.
D
Turning ON and Operation Control
• Keep the switch (A) pressed to keep the screwdriver in
motion. Release the switch to stop the screwdriver motion.
• You may start screwing without turning ON the
screwdriver but, do not try to screw completely this way.
• Move the rotation direction selector to the left to screw.
• Move the rotation direction selector to the right to
unscrew.
Screw

LED Light

• When pressing the switch the LED light is ON.
• Do not stare directly to the light beam. Do not
point it towards other people's eyes.
You may use the magnetic adapter (E):
1. Insert the magnetic adapter all the way down to the bit magnetic bits support.
2. Select the bit that matches the screw.
3. Insert the selected bit up to the stopper in the magnetic adapter.
Insert the bit into
the magnetic adapter and
press firmly until it stops
A
Insert the bit into
the magnetic adapter into
the bits' holder and press firmly
until it stops.
E
Unscrew
A
7
ENGLISH