Parts; Start Up - Truper DESI-36 Instructivo

LED Indicating
Battery Charge
Magnetic
Bit Holder
LED light
Bits (6):
2 Flat Bits
2 Pozidriv Bits
2 Phillips Bits
Hexagonal
Magnetic
Adapter
Screwdriver Battery Charging
•Charge the screwdriver if the charge indicator displays low
battery (red light, A).
• When using an Ion-Lithium rechargeable battery, the
screwdriver may be charge at any moment no matter the
charge level and with no capacitance loss.
• The screwdriver has low battery charge when purchased. It
shall be charged before the first use:
1. Insert the cable contact plug (B) in the screwdriver battery
charge connection (C).
2. Insert the charger plug into a properly installed power
outlet. The LED will display the red light. When the battery is
fully charged, the LED will display green, yellow and red
lights. During the charging process, the power supply socket,
the charger and rechargeable battery will be hot. Is normal
and is not indicating any malfunctioning.
3. Disconnect the charger from the power outlet after 2 hours.
4. Remove the charger cable from screwdriver battery charge
connection.
5. Give the screwdriver time to cool down in environment
temperature if getting hot during the charge process. You can
now operate the screwdriver.
6
ENGLISH
Rotation
Direction Switch
Selector
Handle

Parts

Charger
Battery
Charge
Connection
C
Bits and
Magnetic
Adapter Kit

Start Up

B
A