Running The Train For The First Time - marklin 212 Serie Manual De Instrucciones

6.3 Train
The built-in rechargeable battery must be charged
up before operating the train for the fi rst time!
Make sure the train is turned off before char-
1
ging the battery.
2 Plug the mini USB plug on the recharging
cable included with the train into the mini
USB socket on the train.
The USB plug for the charging cable included
with this set may only be connected to a
charging device from Protection Class II
(example: from a cell phone charger), which
is provided with the following symbol:
The red light in the train will be on during the
charging process.
The charging time with the cable included
with the train is approximately 3 hours.
The train is recharged when the red light in
the train goes out.
After the rechargeable battery is fully char-
3
ged, the charging cable must be removed
from the train and the charging device.
The train can be run approximately 1.5 hours
with a complete charge in the battery.
12

7. Running the Train for the First Time

7.1 Preparing the Train / Turning the Train on
The switch settings on the train
1
and on the remote controller must
agree with each other.
G - G
H - H
Set the train on the track or on a smooth fl at
2
base.
3
If may be necessary to couple the cars (not
included).
G - H
H - G