Maintenance And Upkeep - Ega Master MASTEREX 79989 Manual De Instrucciones

WARNING – Injury due to carelessness.
ATTENTION – If the machine is fixed to suspension equipment make sure
that it is secure. Never hang the machine onto the supply line.
• Separate the machine form any external energy source before changing the
machine tool or an accessory.
• Avoid direct contact with the machine tool during and after use as it can be
hot or sharp. Wear protective gloves!
Defective/ inappropriate gloves can lead to injury. Only wear proper hand
protection, adapted to the work place requirements.
WARNING – Explosion hazard!
When operating pneumatic machines in areas exposed to explosion
hazards, only use accessories, respectively devices, which are ATEX approved
and specified. Use low-sparking accessories.
SAFETY INSTRUCTIONS FOR PREVENTION OF TRANSPORT HAZARDS
CAUTION – Improper Transport, danger of life due to parts falling down!
Damage of the machine!
• Never carry the machine at the supply line.
ATTENTION – Separate the machine form any external energy source
before transportation.
Check that the machine is undamaged and in proper condition. Wear
worker's protective shoes!
WARNING – Maintenance and repair work on pneumatic equipment.
Compressed air can cause severe injury. Observe legal regulations. Take
precautions for persons and environment.
Additionally, observe the following:
• Secure machine against unintentional starting and let the machine cool
down to the ambient temperature
• Use suitable transport equipment, hoists or lifting accessories for moving
heavy assembly groups or parts. Protection against tipping, tumbling or
falling down when assembling/ disassembling the machine/parts.
CAUTION – Skin exposure to hazardous dusts may cause severe
dermatitis. Dust present at the work place could be disturbed during the
maintenance procedure and inhaled. Clean machine and work place before
maintenance work.

MAINTENANCE AND UPKEEP

49