Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
General Information
REVISE EL PAQUETE A SU LLEGADA
Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el
empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la
caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes
o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro
de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre
los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se
muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron
a recoger por terceros.
Installation
IMPORTANT!!!PLEASE READ BEFORE INSTALLATION
•
If the unit has recently been transported. Please let unit stand still for a minimum of 24 hours before
plugging it in.
•
Make sure that the unit drops down to desired temperature before loading the unit with product.
•
Maker sure that there is proper ventilation around the unit in the area where it will operate.
•
Make sure all accessories are installed(i.e. shelves,shelf clips,casters) before plugging the unit in.
•
Please read through the Operation / Owners Manual in its entirety.
CABINET LOCATION GUIDELINES
•
Install the unit on strong and leveled surfaces
- unit may make unpleasant noises if surface is uneven
- unit may malfunction if surface is uneven
•
Install the unit in an indoor,well-ventilated area
- unit performs more efficiently in a well-ventilated area
- for best performance,please maintain clearance of 4" on the back of the unit
- outdoor use may cause decreased efficiency and damage to the unit
•
Avoid installation in a high humidity and/or dusty area
- humidity could cause unit to rust and decrease efficiency of the unit
- dust collected on condenser coil will cause unit to malfunction. Clean the condenser at least once a month
with a brush or clean cloth
•
Select a location away from heat and moisture-generating equipment
- high ambient temperature will cause the compressor to overwork,leading to higher energy bills and
gradual breakdown of the unit.
ELECTRICAL
Please ensure that the required voltage of the compressor is being supplied at all times. Low or high voltage
4
Publicidad
Tabla de contenido
Solución de problemas
