Dmx Linking - Chauvet COLORdash Par-Tri 18VW Guía De Referencia Rápida

EN
AC Power
Power Linking
AC Plug
Fuse
Replacement

DMX Linking

DMX Connection
Master/Slave
Connection
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
You can link up to 15 COLORdash™ Par-Tri 18VW products at 120 VAC or
28 at 230 VAC. Never exceed this number. Power linking cords can be
purchased separately.
Connection
AC Live
AC Neutral
AC Ground
1. Disconnect this product from power.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the
housing.
3. Remove blown fuse and replace with a good fuse of the same type and
rating.
4. Screw the fuse holder cap back in place and reconnect power.
The COLORdash™ Par-Tri 18VW will work with a DMX controller using a
regular DMX serial connection. A DMX Primer is available from
www.chauvetpro.com.
The COLORdash™ Par-Tri 18VW uses a regular DMX data connection for its
DMX personalities: 2 Ch, 3 Ch, and 7 Ch. See the User Manual to connect and
configure for DMX operation.
The COLORdash™ Par-Tri 18VW uses the DMX data connection for its
Master/Slave mode. See the User Manual to connect and configure for
Master/Slave operation.
COLORdash™ Par-Tri 18VW QRG
Wire (U.S.) Wire (Europe)
Black
White
Green/Yellow Green/Yellow
3
Screw Color
Brown Yellow/Brass
Blue
Green
Silver