Contents
Contents
Before Use ............................................................................2
WARNINGS ...........................................................................................................2
CAUTIONS ............................................................................................................3
Maintenance .......................................................................................................3
-Miracast mode ...............................................................................................5
-Wireless Link mode ......................................................................................6
Resetting the adapter ......................................................................................8
References ............................................................................8
Troubleshooting ................................................................................................8
Specifications ......................................................................................................9
Updated information (the latest Instruction Manual, system
updates, new functions, etc.) is available from <http://www.
kenwood.com/cs/ce/>.
2
Before Use
Before Use
IMPORTANT
To ensure proper use, please read through this manual before
using this product. It is especially important that you read and
observe WARNINGS and CAUTIONS in this manual. Please keep
the manual in a safe and accessible place for future reference.
WARNINGS
To prevent accidents and damage
• DO NOT install any adapter or wire any cable in a location where;
- it may obstruct the steering wheel and gearshift lever
operations.
- it may obstruct the operation of safety devices such as air bags.
- it may obstruct visibility.
• DO NOT operate the smartphone while driving.
For connection and installation
• If you connect the ignition wire (red) of the power supply box to
the car chassis (ground), you may cause a short circuit, that in turn
may start a fire. Always connect such wires to the power source
running through the fuse box.
• Do not cut out the fuse from the ignition wire (red) of the power
supply box. The power supply must be connected to the wires via
the fuse.
• Do not install the adapter in a location enclosed with metallic
materials. Otherwise, the reception via Wi-Fi connection may
become poor.
• This adapter has been designed exclusively for use with Kenwood
AV receivers. Do not use this adapter with any other AV receiver.