Energy Saving Function - CombiSteel SL Instrucciones De Funcionamiento

EN

6.8 Energy Saving function

Green function: This function allows the boiler and tank temperatures to be lowered during
periods of machine inactivity, by controlling the temperatures. During this phase, the display
will show the message "GREEN FUNC. ON."
At the start of the wash cycle the heating elements resume their standard activity.
GREEN FUNC. ON
V:55°C
6.9 Programming (user)
With the machine OFF, press the "access programming menu" button (2) for 3 seconds and
confirm with the "start cycle" button (7).
With the buttons 5 (+) and 6 (-), move to the parameter to modify and press the "start cycle"
button (7) to enable the edit. Using the buttons 5 (+) and 6 (-), select the desired value and
confirm by pressing the "start cycle" button (7) again. Press the "ESC" button (3) twice to exit
programming. In the programming menu the user can change the following values
2
MENU
1
USER MENU
3
In the programming menu the user can change the following values
Description
Language IT,UK,FR,ES,DE,PT,NL
Temperature
Acoustic signal
Initial message
Initial text
Brightness
Automatic cycle
Total cycles
44
GREEN
B:82°C
5 7
WHITE
6
Default
Value
parameters
ENGLISH
°C ÷ °F °C
Off ÷ On Off
Off ÷ On Off
******* -
15 ÷ 90 % 75 %
Off ÷ On Off
0 ÷ 999999 -
6.10 Errors that can be viewed on the display
1
ALARM
HEATING
3
List of ERRORS that can be displayed, with the button (7) red steady/blinking:
Alarm
Display Message Description
number
Alarm 01 TANK FILLING TANK not filling
Alarm 02 BOILER HEATING BOILER not heating
Alarm 03 TANK HEATING TANK not heating
Alarm 04 TANK No TANK draining within
DRAINING time-out
Alarm 05 BOILER FILLING BOILER not filling
Alarm 06 BOILER PROBE Boiler probe temperature
outside range
Alarm 07 TANK PROBE Tank probe temperature
outside range
Thermostop Thermostop time-out
Alarm 08
TIME-OUT before rinse
Alarm 09
BOILER SAFETY Boiler safety thermostat
SW intervention
TANK SAFETY Tank safety thermostat
Alarm 10
SW intervention
Alarm 12 PANEL No communication with
CONNECTION circuit board
Alarm 13 PARAMETER The parameters have been
ERROR! compromised
Alarm 15 SERVICE The number of cycles for
WARNING carrying out maintenance
have been reached
7
RED
STEADY/BLINKING
02
BOILER
User checks Installer checks
- Tap does not
- Faulty or clogged
supply water;
solenoid valve;
- Overflow pipe placed
- Clogged boiler;
incorrectly or not inserted;
- Faulty pressure switch;
- Rinse arm nozzles - Clogged air gap;
clogged;
- Inlet pipe constricted
Request technical - Faulty heating element
assistance
- Check possible contactor
Request technical Faulty heating element
assistance
- Check cleaning of filters; Drain pump blocked by
- Make sure the drain hose a foreign body or faulty
is not blocked or pinched;
- Tap does not supply
- Faulty or clogged
water;
solenoid valve;
- Constricted inlet pipe
- Faulty pressure switch
Request technical Check boiler
assistance temperature probe
Request technical Check tank temperature
assistance probe
Request technical - Faulty boiler heating
assistance element;
- Check possible contactor
Request technical Check boiler safety
assistance thermostat
Request technical Check tank safety
assistance thermostat
Request technical Check circuit board
assistance cable connections
Request technical Carry out initial
assistance installation sequence by
entering the four-digit
machine code
Request technical Carry out a dishwasher
assistance maintenance/check
EN