Zeemote JS1 Guía De Usuario página 11

7) Setting up the Zeemote JS1
Press and hold the Power / D button for 3 seconds until
•
the indicator light begins to flash.
Select "Controller" from within Zeekey Application, then
•
Select "Search"
The screen will display "Searching for devices. This may
•
take a few moments."
A list of devices will be displayed. Select "Zeemote JS1".
•
The following message will appear on the screen:
"Connecting to Zeemote JS1. This may take a few moments."
Once connected, the message "Connected to Zeemote
•
JS1" will appear.
The Zeemote JS1 indicator light will flash slowly,
•
indicating a connection.
Zeekey will now be set up to automatically connect with
•
your JS1 in the future.
The Zeemote Controller is ready for use.
8) Reconnecting the Zeemote JS1
Once you have used the Zeemote JS1 Controller with
•
Zeekey, the phone will connect automatically with your JS1.
If you choose not to use this option, to reconnect,
•
choose "Reconnect" from the Zeekey Controller screen.
The screen will then display "Connecting to Zeemote
•
JS1. This may take a few moments." When successful,
the screen will display "Connected to Zeemote JS1."
The Zeemote JS1 indicator light will flash slowly,
•
indicating a connection.
YOU ARE READY TO PLAY!
9