Philips sonicare AirFloss Pro HX8331/01 Manual De Instrucciones página 14

ENGLISH
14
4 Snap the handle into two parts.
Note: This step requires a good amount of physical
force. The top and bottom half of the handle should be
separated once you snap the handle.
5 Remove the bottom half of the handle.
6 Cut all 6 wires on the internal component
with scissors.
7 Completely pull apart the internal component
from the top part of the handle.
8 The battery is located inside the top half of the
handle. Remove the battery and dispose of it
properly (not in household waste).