Tabla de contenido
Publicidad
12
●
S
●
U
●
T
ENGLISH
ROUTINE MAINTENANCE
Filter Screen
The filter screen
removed by turning it counter-clockwise. It should be checked regularly
to ensure an open airway. Reinsert the screen by turning it clockwise
(FIG. 18).
Bottom Filter Maintenance
Check the bottom filter
bottom filter every 12 months.
Step 1: Remove the bottom filter cover
FIG. 18
and pivoting to the left (FIG. 19).
Step 2: Pull filter frame from unit by pulling on tab in center (FIG. 20).
Step 3: On some models, remove filter pad and shake to remove excess
dust. If necessary this pad can be cleaned by vacuuming with
another cleaner (FIG. 21).
Step 4: Replace filter
pivoting back onto cleaner from left to right.
PERIODIC MAINTENANCE
CAUTION: Turn off the switch
before periodic maintenance. Never operate the vacuum
cleaner without the dust bag or filter assembly in place.
Brushroll
The brushroll turns as it sweeps and combs the carpet nap. Remove hair
and threads from the brushroll so it continues brushing the carpet. To
FIG. 19
maintain the most efficient cleaning, the bristles must touch the carpet.
To test the bristle length, hold a ruler against the underneath side of the
cleaner. If the bristles no longer touch the ruler, replace the brushroll.
Brushroll Belt, Style U
The brushroll belt turns the brushroll to agitate, sweep, and comb the
carpet nap. Check the belt regularly to be sure it is in good condition.
Replace the belt if it stretches, cracks or loses tension. Cut away any hair
or threads wound around the brush roll or the belt pulley because the
buildup could cause the belt to rotate unevenly.
FIG. 20
FIG. 21
(CONTINUED)
(continued)
●
S
is located directly above the dust cup and is easily
●
T
frequently. For optimum performance, replace
●
U
by grasping the right edge
●
T
into unit. Replace bottom filter cover
●
N
and unplug the electrical cord
●
U
by
●
E
Publicidad
Tabla de contenido
