Ega Master 57506 Manual De Instrucciones página 6

ENGLISH
Warning!
1. The pressure created in the machine can cause damage.
2. Respect the general safety instructions, wear shoes and goggles.
3. Check that pressure hoses are not damaged and that there are free of any obstruction: if
necessary, replace them with original parts.
4. In case of not using the machine for an extended period or in countries of low temperatures,
mix some antifreeze solution with the oil inside the machine. This will prolong the life of the
seals.
COD
57506
57507
Before starting work, check the integrity of all components.
1. Connect the hose to the machine connector and make sure that there are no leaks. Use
Teflon in the screw connector and tighten with a wrench. This machine is compatible with pumps
with maximum pressure of 700 bars.
6
SAFETY INSTRUCTIONS
TECHNICAL SPECIFICATIONS
Standard
Ø stud (mm)
wedge (mm)
18 3-34
27 3-43
TONS
5
10
GUIDE OF USAGE
PRESSURE Weight (kg)
700 bar/
10.000 psi
12
5