Huffy CLASSIC TRIKE El Manual Del Propietario página 7

ASSEMBLY: Handlebar and Front Wheel
Handlebar and Front Wheel:
A
1 . Place a Spacer
B
Tube .
2 . Insert the Fork Tube through the
C
Head Tube
3 . Orient the Slot
Tube toward the rear of the unit .
4 . Place other Spacer
Clamp Assembly
Tube with the open end of the
Clamp in-line with the Slot
Fork Tube .
5 . Slide the Clamp Cover
the Handlebar
6 . Insert the Handlebar into the Fork
Tube .
WARNING
: Ensure that the
Minimum Insertion Mark
tube is not visible - is below the top of
the Fork Tube .
7 . Align the Handlebar so that it is
straight with the front wheel .
8 . Secure the Handlebar in the Fork
Tube by tightening the Clamp
securely .
9 . Check that the Clamp is tight
enough so that the Handlebar will
not rotate inside of the Fork Tube .
10 . Slide the Clamp Cover
Clamp .
onto the Fork
from bottom .
D in the top Fork
A , then the
E onto the Fork
in the
D
F
as far up
G
as possible .
on the stem
H
E
F over the
F
E
D
G
H
A
C
B
7