Huffy CLASSIC TRIKE El Manual Del Propietario página 8

ASSEMBLY: Stem Seat (various models)
A
ASSEMBLY: Bolt-on Seat (various models)
B
8
B
C
Seat Assembly:
1 . Loosen Bolt
2 . Insert Seat Stem
Frame as shown .
3 . Set Seat to proper height for
child and tighten Bolt
securely .
• Test Seat by trying to turn it side
to side . It should not move .
Seat Assembly:
1 . Position Seat
mounting holes align with the
Frame Holes as shown .
A
2 . Insert Screws/Bolts
the Seat and Frame Holes .
3 . Install Washers and Nuts
Tighten Securely so that seat
does not move .
A as needed .
B through
A
A
so that the
B
through
C .