DW60R2014(A5)_IM_DD81-02707A-00_EN.indd 19
3. Drill one hole into both sides of the
kitchen cabinet, totaling 2 screw holes.
• Make sure the hole you drill is smaller
than the diameter of the screw.
• Make sure the drill bit does not strike
the sides of the spacer cap holes.
4. Tighten the provided screws into the
holes to secure the dishwasher to the
cabinet.
5. Insert the provided plastic caps to the
2 places where screws are fastened.
English
English
19
2019-02-20
3:00:31