Whalen SFKCWMS Manual De Instrucciones página 4

Drawer Handle with Bolts
(2 used in this step)
1. Unpack the unit and confirm that you have all the hardware and required parts.
2. Place the Top Section (A) on a level and protective surface.
3. Remove the utility drawers for the following steps. To remove the drawers, please pull the drawers all
the way out, then simultaneously push the plastic release lever of the ball bearing slides up on one side
and down on the other side, and then pull the drawers completely out.
4. Remove the bolts in Drawer Handles (6), and then use the bolts to attach the Handles to the outside of
the utility drawers by a Phillips screwdriver.
Assembly Instructions
A
⑥
4
6
6