Number
Description
1
Plunger
2
Food inlet
3
2-layer stainer filter
4
Integrated waste container
5
Drive shaft
6
Safety latch
7
Control elements (Power On / OFF + change speed levels)
8
Display
9
Spout with drip-stop function
10
Transparent lid
Note: When assembling the appliance, please ensure that the correct sequence
(starting bottom to top) is followed, as shown in Figure 1.
4. Usage
Take the appliance out of the package and remove all the packaging material. Place
it on an even and firm surface.
• Connect the plug to a properly installed socket.
• Place the juice container under the juice spout with drip stop function (9).
• Turn the juice spout (9) with the mark facing up to use the drip stop function
(e.g., when changing the juice container). Turn it down to open the juice spout
again.
Caution! The juice spout is not completely closed! This is only a drip stop.
• Close the safety latch (6) on both sides.
English
23