Power On/Off; Video Recording - Wiseup L200 Guia Del Usuario

[Note]: If no Micro SD card is fitted into the camera, the indicator light will glow solid white for 4 seconds and flash
white 3 times, then turn off. The camera will shut down automatically.

3.1. POWER ON/OFF

3.1.1. Power on the camera by holding down the Power Button for 2 seconds, the camera will enter
into sound-activated video recording mode automatically. The indicator light will glow solid white for
4 seconds and flash white once, then turn off.
3.1.2 Press the Power Button once to get into standby mode. The indicator light will flash white
twice and then be solid white.
3.1.3. Power off the camera by pressing the Power Button for 4 seconds in standby mode. The
indicator light will flash white twice and glow solid white for 2 seconds, then turn off.
[Note]: The camera will shut down automatically if it is in standby mode without any operation more than 2
minutes.
3.2. SOUND-ACTIVATED VIDEO RECORDING
3.2.1. Power on the camera by holding down the Power Button for 2 seconds, the camera will enter
into sound-activated video recording mode automatically. The indicator light will glow solid white for
4 seconds and flash white once, then turn off.
3.2.2. When surround sound is over 65 decibels, the camera will start video recording
automatically.
3.2.3. Press the Power Button once to exit the sound activated video recording mode. The indicator
light will flash white twice and then be solid white, indicating the camera has entered into standby
mode automatically.
[Note]:
1). A video clip will be generated and saved every 2 minutes automatically.
2). Video Format: AVI Video Resolution: 720x480

3.3. VIDEO RECORDING

3.3.1. Power on the camera by holding down the Power Button for 2 seconds, the camera will enter
into sound-activated video recording mode automatically. The indicator light will glow solid white for
4 seconds and flash white once, then turn off.