GEA JX7227 Instrucciones De Instalación página 4

5
INSTALL THE TOP BRACKET
A Place the top bracket on the top of the microwave
oven, with the tabs on the top and sides of the
bracket fitting squarely against the microwave oven.
Screws
B Drill pilot holes through the holes in the top bracket.
Attach the top bracket to the cabinet using nine
round-head screws.
JX7227 and JX7230
49-40697
06-13 GE
Installation Instructions
6
INSTALL THE TRIM FRAME
A Place the trim frame over the microwave oven.
Open the microwave oven door. Secure the trim
B
frame using four flat-head screws (two on the inside
top and two on the inside bottom).
Flat-head screws
7
REPLACE ANY LOOSE ITEMS
Your trim kit is now fully installed. Replace any loose
A
items that were removed from the inside
of the microwave oven. Save or discard the extra
screws. Do not place them in the microwave oven.
B Keep these installation instructions for future
reference.
Replace house fuse or close circuit breaker to
C
restore power at the service panel.
4
Flat-head screws
Printed in China