Kohler K-10411 Guia De Instalacion página 4

3" (7.6cm)
or Larger
HOT
3. Install the Supplies
CAUTION: Risk of restricted waterflow and product damage.
Use extreme care to avoid kinking and twisting when connecting
the hoses. Hoses must not be taut when installed.
NOTE: If your installation requires that you coil the supply hoses to
obtain a good connection, maintain an inside coil diameter of at
least 3" (7.6cm).
Carefully position the hot and cold supplies so they will not
interfere with other hoses.
Connect the supply hoses to the supply stops.
4. Installation Checkout
If it is not already done, complete the sink installation.
Ensure that all the connections are tight.
Move the faucet handle into the off position.
Turn on the main water supply and check for leaks.
Remove the aerator from the spout.
Turn on the water and position the handle in both the hot and
cold positions. Run water for at least one minute to remove any
debris in the spout.
Reinstall the aerator.
1018338-2-B
Cold
COLD
4
Aerator
Kohler Co.