Faucet Installation - Kohler K-10411 Guia De Instalacion

Escutcheon
Hose Outlet
Supply
Stud
Hoses Inlets
Undercover
Bracket
Apply
Plumbers
Washer
Putty
Nut

1. Faucet Installation

Slide the undercover over the faucet supply hoses and the hose
outlet.
Apply plumbers putty or other sealant to the underside of the
undercover according to the putty manufacturer's instructions.
Feed the faucet supply hoses and hose outlet through the sink
hole and position the faucet.
Slide the bracket and washer over the stud, thread on the nut and
tighten securely.
2. Install the Handspray
Apply plumbers putty or other sealant to the underside of the
spray holder according to the putty manufacturer's instructions.
Insert the spray holder through the sink hole.
From under the sink, securely hand-tighten the nut.
Remove any excess putty or sealant.
Insert the handspray hose through the spray holder and attach
the hose to the hose outlet.
NOTE: If the sink is not installed at this time, install it now.
Kohler Co.
Handspray
Faucet
Handspray
Holder
Sink
Hose
Outlet
3
Apply
Plumbers
Putty
Sink Nut
Supply
Hose
Hose
1018338-2-B