until you reach the desired
level: 1, 2, or 3. Press the
button repeatedly until you
reach the desired level: 1 or 2.
•
The activation of either the
RF or speed function will
automatically activate the
other function at level 1.
Select di erent levels based
on your "preliminary test".
Sensilift is equipped with
•
safety sensors which will keep
the temperature in the
e ective and safe range
during the whole treatment.
3.
Place the treatment fingers on
the intended area, ensuring full
contact with your skin during
the entire treatment. Sensilift
will indicate the proper skin
contact by the green indicator
light. If the Sensilift is not
properly placed, the RF energy
will not be delivered and the
indicator light will be o .
4.
If you do not feel sensations
of warmth after
approximately 10 seconds,
try moving Sensilift on a
smaller treatment area,
and/or increasing the RF
energy level.
5.
Move the device on the
treated area with slow
circular or back and forth
motion. Make sure constantly
and firmly contacting the skin
during the whole treatment.
6.
Turn o the device and then
14
unplug at the end of each
treatment session.
7.
After completing the
treatment, wipe o the "Base
Gel" from the treated area.
8.
Clean the device with soft
damp cloth or paper towel,
according to cleaning
instructions (see Cleaning
section).
Recommended treatment
protocol:
Typical Sensilift Treatment
Interval
Use the Sensilift device once a
week on each desired area for
a period of 8 weeks.
To sustain optimal long term
results, you can repeat Sensilift
treatment protocol as needed.
Notes:
Response to Sensilift device
1.
di ers between individuals
depending on biological
factors, heredity and aging.
2.
For long term results,
additional treatments may be
repeated for maintenance.
3.
You may use the treatment
log at the end of this manual,
to assist you with recording
your treatment areas, dates
and duration.
4.
In rare cases, treating the
chin and sideburn can lead
to paradoxical e ect of hair
regrowth.