User Interface Description - Sensica sensiLift ST100 Serie Manual Del Usuario

User interface description

Status
Indicator
RF energy level
selection touch
button
Speed level
selection touch
button
*Note: The activation of either the RF or Speed function will automatically
activate the other function at level 1. You can select other levels based on
the "preliminary test".
Notice that you cannot use RF function alone or speed function alone.
They always work together!
Note: when the RF and speed is on but there isn't any contact with the
skin for 45 seconds, the device will automatically return to stand-by mode.
Sensilift is on Stand-by mode.
In case of no light, make sure
Blinking yellow
the power cord is plugged-in
light
properly.
No indicator When energy (1-3) or speed (1-2)
light – before
level are selected and ON – you
treatment
can start your treatment.
Sensilift is in Treatment mode, RF
is activated, skin contact is
Steady green
detected and the treatment is
light
ongoing.
Sensilift is in Error mode, the
Blinking
device has detected a
alternating
malfunction and prevents the
green and
activation of the RF and speed
yellow lights
functions.
Green light on, indication of RF
energy level. Press the RF
1-3 energy
energy level selection button
levels lights
repeatedly until you reach the
desired level: 1, 2, 3 or o . *
Green light on, indication of
speed function level. Press the
1-2 speed
speed level selection button
level lights
repeatedly until you reach the
desired level: 1, 2, or o . *
7