Eco Function; Ifeel Function; Turbo Function; Mute Function - Danby DAS120EAQHWDB Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATING INSTRUCTIONS

ECO FUNCTION

The ECO function will automatically cycle the
outdoor fan on and off when the compressor is not
in use and will minimize compressor running speeds
to conserve energy. This function is available in cool
and heat modes.

TURBO FUNCTION

Press the turbo button to activate the turbo function,
which will run the appliance continuously at high
fan speed to reach the preset temperature in the
shortest amount of time. The turbo function is
available in cool, heat and fan modes.

MUTE FUNCTION

Press the mute button to activate the mute function.
Press the mute button again to deactivate the mute
function.
When the mute function is active the indoor unit will
run the lowest fan speed in order to be as quiet as
possible.
The mute function is not available in dry mode.
Changing the fan speed or set temperature will
cancel the mute function.

iFEEL FUNCTION

This function enables the remote control to measure
the temperature at its location and send this signal
to the air conditioner to optimize the temperature
around you and ensure comfort.
Press the iFEEL button to activate the iFEEL function.
It will automatically deactivate after 2 hours. Press
the iFEEL button any time to cancel this function.
SWING FUNCTION
Press the swing button to activate the louver swing.
Press the swing button again to stop the louver at
the desired angle.
There is a button for the horizontal louver and one
for the vertical louver.
Never position the louvers manually if that are
automatic as the louver motors are delicate and
may be damaged.
Do not place fi ngers, sticks or other items into the
air inlet or outlets. Contact with live parts can cause
damage or injury.
21

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Das180eaqhwdb

Tabla de contenido